Gasregulator, H&K

Stalon Gasregulator for Heckler & Koch adjusts the gas pressure for use of silencer on semi-automatic rifles.

Category:

Stalon Gasregulator for Heckler & Koch adjusts the gas pressure for use of silencer on semi-automatic rifles.

When you mount a silencer on a semi-automatic weapon, the reloading gas pressure will increase. This gas valve makes the gas pressure adjustable for use of a silencer.

INSTALLATION INSTRUCTION

Gas regulator for Heckler & Koch

Remove original gas valve from the gas block of the rifle and clean any loctite left inside the gas block

Carefully tighten the valve and open the small adjustment screw to open the evacuation holes. Make sure that the valve do not touch the forearm. If the valve touches the forearm this must be fixed before shooting. The easiest way is to carefully mill out material from the forearm until the valve runs freely.

Make sure that the adjusting screw is full opened on the gas valve before continuing to the next step.

shoot the rifle and adjust the screw clock-wise at a maximum of 90 degrees at each time until your rifle is throwing the empty shells 90 degrees straight out from the rifle.

At too high gas pressure the rifle will reload to hard and throw the empty shells forward. A high gas pressure is the most common problem in reloading failures.
At too low gas pressure the rifle will reload slowly and throw the empty shells backwards. This might cause problems with locking of the bolt.

Please contact us if you need guidance when mounting a gas regulator or consult an authorized gun smith.

 

 

Technical data:

The products contains:

1 pcs Gas regulator for Sauer 303

Suitable for:

Weapon Sauer 303

Measurements:

-

Weight:

-

Material:

Stainless steel

Color:

stainless

Other:

-

STALON WARRANTY

Together with every silencer delivered from Stalon follows a 2-year warranty. A promise that if something during the manufacturing process of your silencer failed, we will take care of and correct it.
However, if the silencer has been damaged due to mishandling, careless usage or just from an accident, the warranty cannot be applied for repairs. Even if the warranty does not apply, we want to help you, and of course for a decent price.

*Service, repairs and other procedures can only be made by Stalon AB or by Stalon authorized service workshop.