Front 108 fits all models in the X-series (X108, X149, XE108 & XE149). Front 108 is an accessory that complements an already existing silencer from the X-series with an extra front. Additional fronts are available in several different calibers, from .17 to .45, however, the front 108 gives the best effect and reduction of the sound from the cal. .243 to cal. .375.
The front is available in two different models, Front 108 and Front 149.

Front 108 is our shortest front to the X-series, extending only 108mm in front of the muzzle. The short front is optimal for mobile hunting, driven hunting or other hunting forms where flexibilty is of the highest priority.
Front 108 effectively reduces sound in relation to its size and extension, the front also minimizes the muzzle blast/flash. Efficiency is equally good regardless of whether it is mounted on a X or XE rear part. Read more about sound reduction for specific calibers and models under "measurements".
For even better sound reduction, we recommend the longer and more quiet Front 149.

Front 108 is available in the following calibers:
Max cal. .243 (e.g: .222, .223, .243, and more..)
Max cal. .30 (e.g: 6,5x55, .270, .308, 30-06, .300, and more..)
Max cal. .375 (e.g: 8x57, .338, 9,3x62, .375, and more..)
Max cal. .45 (e.g: .45)

X-Series
X-series consists of four different models with varying length, weight and power, adapted for all types of hunting. Common to all models is that the fronts (Front 108 / Front 149) are interchangeable, which means that the front can easily be replaced or supplemented to another model and / or caliber. The advantage of interchangeable fronts is that the silencer can always be adapted to all types of hunting and shooting.

INSTALLATION INSTRUCTION

Front 108
Front 108 is mounted on one of the X-series rear parts (X or XE). Make sure that the Front model and caliber are right according to your demands before mounting.

Before the Front 108 is mounted on the rear part, the current front needs to be removed from the existing rear part.

Clean and lubricate the thread in the split with Stalon silencer grease and then mount Front 108 on the rear part.

Ensure that Front 108 is secured.

If the new Front differs in weight, extension and/or other properties, the point of impact may in some cases change, so it is important after the installation of a new/extra Front to test shoot the rifle to ensure good precision.