Conical barrel support for W series gives the same support to the barrel as the standard barrel support. The conical barrel support serves as a universal accessory for fixing other Stalon accessories, such as: Stalon Open sight, the accessory is also very popular to use as a "better-looking" barrel support and to smooth out the lines between the barrel and silencer.

Conical barrel support for W-series is an alternative to the standard barrel support and replaces its function. The conical barrel support creates a streamlined appearance between the weapon and the silencer, a very appreciated appearance of our users.
The conical barrel support was originally developed for holster backpacks, in order to be able to easily pick up the weapon without getting stuck with the silencer in the backpack.

INSTALLATION INSTRUCTION

Conical barrel support
The conical barrel support is mounted directly on the rear of the silencer. Before mounting the conical barrel support, it needs to be adapted to the specific weapon. The "hole" in the barrel supprt should always be 0,5-0,7mm larger than the barrel diameter, note that the dimension of the barrel should be measured where the conical barrel support is positioned when the silencer is mounted: W110 / W145 = approx: 130mm measured from the muzzle of the barrel, WM110 / WM145 = approx: 164mm measured from muzzle of the barrel.

When the accessory is adapted to the weapon, it is ready to be mounted in the rear of the silencer, the standard barrel supprt on the silencer needs to be removed before mounting the conical barrel support.
Secure the conical barrel support only by hand.

Install the silencer with the conical barrel support and check that the adjustment is OK, the barrel support sholud not touch the barrel at any point.

IMPORTANT: A barrel support that touches the barrel and/or is stuck affects the barrel in a bad way and the point of impact / precision is limted.