Barrel support for X-series provides an extra support point against the barrel, the extra support point acts as a protection so that the silencer and the thread on the weapon is not damaged if an accident occurs. The barrel support is a standard accessory for the X-series and comes with every new model (X108, X149, XE108 & XE149).
The barrel support for X-series have to be adapted to the weapon, see installation instructions below.
All models in the X-series are delivered from us with a Standard barrel support, the barrel support is supplied with a hole diameter of approximately 13mm as standard, which is too small for any barrel and needs to be adapted to the barrel. The exception being models with M14x1 and M15x1 thread which are supplied with a hole diameter of 18mm.
Barrel support, X-Series
The barrel support is mounted directly on the rear of the silencer.
Before mounting the barrel support, it needs to be adapted to the specific weapon. The "hole diameter" of the barrel support should always be 0.5-0.7mm larger than the diameter of the barrel, note that the dimension of the barrel have to be measured where the barrel support is postioned when the silencer is mounted: X108 /X149 = approx: 130mm measured from the muzzle of the barrel, XE108 / XE149 = approx: 160mm measured from muzzle of the barrel.
When the barrel support is adapted to the weapon, it is mounted in the rear of the silencer. secure the barrel support only by hand.
Mount the silencer with the barrel support and check that the adjustment is OK, the barrel support should never touch the barrel at any point.
IMPORTANT: A barrel support touching the barrel and/or is stuck affects the barrel oscillations and the impact image/precision is limited.
The products contains:
1 pcs barrel support, X-Series
Diameter: 45mm, Length incl. thread: 11mm, visible length excl. thread: 7,5mm
7-9gram depending on hole diameter
Base material: durable black composite
Together with every silencer delivered from Stalon follows a 2-year warranty. A promise that if something during the manufacturing process of your silencer failed, we will take care of and correct it.
However, if the silencer has been damaged due to mishandling, careless usage or just from an accident, the warranty cannot be applied for repairs. Even if the warranty does not apply, we want to help you, and of course for a decent price.
*Service, repairs and other procedures can only be made by Stalon AB or by Stalon authorized service workshop.