Front 110, W-series

Front 110 is our shortest front to the W-series, extending only 110mm in front of the muzzle. The short front is optimal for mobile hunting, driven hunting or other hunting forms where flexibility is of the highest priority.
Front 110 greatly reduces sound efficient in relation to its size and extension.

 

Key features:

  • Excellent sound reduction
  • Reduce recoil
  • Minimal extension of weapon, 110mm
  • low weight, apx: 210gram
  • Extreme durability

Front 110 fits all models in the W-series (W110, W145, WM110 and WM145). Front 110 is an accessory that complements an already existing silencer from the W-series with an extra front. Additional fronts are available in several different calibers, from .17 to .45, however, the front 110 gives the best effect and reduction of the sound from the cal. .243 to cal. 9,3mm.
The front is available in two different models, Front 110 and Front 145.

Front 110 is our shortest front to the W-series, extending only 110mm in front of the muzzle. The short front is optimal for mobile hunting, driven hunting or other hunting forms where flexibilty is of the highest priority.
Front 110 effectively reduces sound in relation to its size and extension, the front also minimizes the muzzle blast/flash. Efficiency is equally good regardless of whether it is mounted on a W or WM rear part. Read more about sound reduction for specific calibers and models under "measurements".
For even better sound reduction, we recommend the longer and more quiet Front 145.

Front 110 is available in the following calibers:
5.6-6.1mm (ex: .222, .223, .243, etc.)
6.5-7.62mm (ex: 6.5x55, .270, .308, 30-06, .300, etc.)
Caliber 8.0mm (ex: 8x57, etc.)
8.0-9.3mm (ex: 8x57, .338, 9.3x62, etc.)
.375 (ex: .375)
.45 (ex: .45)

W-Series
W-series consists of four different models with varying length, weight and power, adapted for all types of hunting. Common to all models is that the fronts (Front 110 / Front 145) are interchangeable, which means that the front can easily be replaced or supplemented to another model and / or caliber. The advantage of interchangeable fronts is that the silencer can always be adapted to all types of hunting and shooting.

 

INSTALLATION INSTRUCTION

Front 110
Front 110 is mounted on one of the W-series rear parts (W or WM). Make sure that the Front model and caliber are right according to your demands before mounting.

Before the Front 110 is mounted on the rear part, the current front needs to be removed from the existing rear part.

Clean and lubricate the thread in the split with Stalon silencer grease and then mount Front 110 on the rear part.

Ensure that Front 110 is secured.

If the new Front differs in weight, extension and/or other properties, the point of impact may in some cases change, so it is important after the installation of a new/extra Front to test shoot the rifle to ensure good precision.

Technical data:

The products contains:

1 pcs Front 110

Suitable for:

Stalon W-Series

Measurements:

Length: 119mm,
Extension of weapon when mounted: 110mm
Diameter: 50mm

Weight:

204-210gram

Material:

Anodized high quality aluminium

Color:

Matt black

Other:

The center core, i.e the center of the first baffle, is made of steel for maximum durability.

STALON WARRANTY

Together with every silencer delivered from Stalon follows a 2-year warranty. A promise that if something during the manufacturing process of your silencer failed, we will take care of and correct it.
However, if the silencer has been damaged due to mishandling, careless usage or just from an accident, the warranty cannot be applied for repairs. Even if the warranty does not apply, we want to help you, and of course for a decent price.

*Service, repairs and other procedures can only be made by Stalon AB or by Stalon authorized service workshop.